Activity

A plunge cut is a type of cut which goes in the surface of a material from above. Plunge-cutting with a router must be performed having a specific plunge router and a plunge-cutting router bit – a router bit with a bottom cut facility, which suggests their cutting edges extend over the bottom of the bit. Other routers are fixed base routers and won’t be well suited for making plunge cuts.

Be sure you hold the right sort of router bit. Ensure the bit you ultimately choose is designed to plunge-cut, or, the end will spin from the surface of the material and can burn it. Plunge cutting router bits could possibly be labelled as bits having a bottom cut function, however, if you’re unsure always check the specifications of individual bits before you use them. Using the wrong equipment damages your machinery along with your workpiece.

Set the height of your router bit. If you want to plunge-cut right down to a certain depth, you need to set the depth in your router before working. The method that you make this happen depends upon the company of router you choose, but many make use of a way of depth stop (usually a rod and column) that can be adjusted on the height you need. The depth stop limits what lengths into material the bit may be lowered. The Trend branded routers possess a 3 turret depth stop that permits you to pre-set 3 separate heights for plunge cutting that will simply be changed as you work.

The first step. Turn on the router and lower the bit down to the workpiece.

Step two. As soon as the bit has cut with the surface, you are able to slowly move the router to make your chosen cut.

Make deeper cuts progressively! Plunging deeper than several millimetres with a single cut shouldn’t be done. Instead, you ought to make a compilation of shallow cuts that get progressively deeper. Because of this less strain lies for the cutting edges of your respective router bit, and also on the router’s motor itself.

Take regular breaks. Every now and then you ought to bring the router bit backup out of the material and switch the router off and so the motor and router bit can cool down, and you can clear any debris from your cut. You should also clear any waste from the cut in order to avoid it from becoming clogged. Ensure you use an appropriate dust extractor with the routers.

For details about 5 axis cnc router please visit web page:

web link.